Receiving a Fax
115
Fax
6
4 Select [Fax Line Settings].
5 Select [ ] until [DRPD Pattern] appears, and
then select [DRPD Pattern].
6 Select the desired pattern, and then select [OK].
7 Reboot the machine by turning the power switch off and then on again.
Receiving Faxes in the Memory
Since the machine is a multi-tasking device, it can receive faxes while you are making copies
or printing. If you receive a fax while you are copying, printing, or run out of paper or toner,
the machine stores incoming faxes in the memory. Then, as soon as you finish copying,
printing, or re-supply the toner cartridges, the machine automatically prints the fax.
To Next Page
Loading...
Need help?
General
