Fuji Xerox DocuCentre SC2020 User Manual

9 Tools
212
Tools
9
Resetting to Factory Defaults
After executing this function and rebooting the machine, the address book or all the menu
parameters, except the parameters for the network, are reset to their default values.
1 Press the <Machine Status> button.
2 Select the [Tools] tab.
3 Select [Admin Settings].
4 Select [Maintenance].
5 Select [Initialize NVM].
Services Home
Job Status
Machine Status
<Machine Status> button

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English