Printing
149
Print
8
Printing
This section describes how to print document.
The procedure used to print will vary according to the application you are using. See your
application's manual for the specific procedure.
The steps below are the operation used for the [FX DocuCentre SC2020] print driver screen.
1 Select [Print] from the application's [File] menu.
2 Select [FX DocuCentre SC2020 PCL 6].
3 If needed, click [Properties] to make
advanced settings.
Note • For information on the Print
functions, click [Help] in the print
driver screen to display the Help
Information.
4 Click [OK].
5 Click [OK] in the [Print] dialog box.
To Next Page
Loading...
