Non-Genuine Mode
281
Problem Solving
13
Non-Genuine Mode
When toner within a toner cartridge is empty, the [Out of Toner] message appears.
When you want to use the machine in Non-Genuine mode, program the mode and replace
the toner cartridge.
Important • If you use the machine in the Non-Genuine mode, the performance of the machine may not be at
its optimum. And any problems that may arise from the use of the Non-Genuine mode are not
covered by our quality guarantee. The continuous use of the Non-Genuine mode can also cause the
machine to break down, and any repair charges for such break down will be incurred by users.
Note • Before starting the operation described below, confirm that [Ready] is displayed on the LCD panel.
1 Press the <Machine Status> button.
2 Select the [Tools] tab.
3 Select [Admin Settings].
4 Select [Maintenance].
5 Select [Non-Genuine Toner].
6 Select [On], and then select [OK].
The machine switches to the Non-Genuine mode.
To Next Page
Loading...
Need help?
General
