Overview of Copy Operations
75
Copy
5
2 Place the document in the center of the
document feeder, with the side to be scanned (or
the front surface of a 2 sided document) facing
up.
3 Align the document guides to each side of
document.
4 Open the document stopper.
Document Glass
îš„ Document sizes supporting automatic detection
The document size is detected automatically when [Original Size] is set to [Auto].
The following document sizes are detected automatically: A3 , B4 , A4 , A4 , B5 ,
B5 , A5 , 11 × 17" , 8.5 × 11" , 8K , 16K , and 16K .
Important • When copying multiple pages of a document, the document size of the first document page is set to
copy the rest of the document.
Note • The machine automatically determines the tray holding the appropriate paper, based on the
document size and the specified zoom ratio.
îš„ Supported document sizes
You can select one of the following document sizes from [Original Size].
A3 , B4 , A4 , A4 , B5 , B5 , A5 , 11 × 17" , 8.5 × 14" , 8.5 × 13" , 8.5 × 11" ,
8.5 × 11" , 8K , 16K and 16K .
Note • You can select a custom paper size specified for Tray 5 (bypass) using the Tray Settings. For more
information, refer to "Tray 5 (Bypass)" (P.196).
Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.
To Next Page
Loading...
Need help?
General
