Fuji Xerox DocuCentre SC2020

9 Tools
190
Tools
9
 Edge Erase
Purpose:
To specify the value of the top and bottom margins.
Values:
Scan Defaults
To modify the defaults for the [Scan] menu and [Email] menu defaults.
Note • Bold values are the factory default menu settings.
 File Format
Purpose:
To specify the file format to save the scanned image.
Values:
 Output Color
Purpose:
To specify whether to scan in color, black and white, or gray scale.
Values:
 Resolution
Purpose:
To specify the default scan resolution.
Values:
Note • [600 dpi] cannot be selected when [Output Color] is set to [Color].
Top / Bottom 0.1 inch (2 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0-50 mm)
Left / Right 0.1 inch (2 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0-50 mm)
Middle 0.0 inch (0 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0-50 mm)
PDF
Multi-Page TIFF
TIFF (1 File per page)
JPEG (1 File per page)
XDW
Color Scans in color.
Black & White Scans in black and white.
GrayScale Scans in grayscale.
200 dpi
300 dpi
400 dpi
600 dpi