7 Scan
132
Scan
7
• Windows Server 2003
FTP service of Microsoft Internet Information Services 6.0
• Windows Vista, Windows Server 2008
FTP service of Microsoft Internet Information Services 7.0
• Windows 7, Windows Server 2008 R2
FTP service of Microsoft Internet Information Services 7.5
• Windows 8, Windows Server 2012
FTP service of Microsoft Internet Information Services 8.0
• Windows 8.1, Windows Server 2012 R2
FTP service of Microsoft Internet Information Services 8.5
• Mac OS X 10.5/10.6/10.7/10.8/10.9
FTP service of Mac OS X
For information on how to configure the FTP service, contact your system administrator.
Follow the procedure below to use the Scan to Server/Computer feature.
îš„ For SMB:
îš„ For FTP:
Setting a Login Name and a Password (SMB Only)
The Scan to Computer/Server feature requires a user login account with a valid and non-
empty password for authentication. Confirm a login user name and password.
If you do not use a password for your user login, you need to create a password on your User
Login Account. The following uses Windows 7 as an example. The procedure differs
depending on the OS.
1 Click [Start] > [Control Panel].
2 Click [User Accounts and Family Safety].
3 Click [User Accounts].
4 Click [Create a password for your account] and add in a password for your user login
account.
Creating a Shared Folder (SMB Only)
Share a folder to store the scanned document using the following procedure.
The following uses Windows 7 as an example. The procedure differs depending on the OS.
Step Procedure See Page
1 Setting a Login Name and a Password (SMB Only) P.132
2 Creating a Shared Folder (SMB Only) P.132
3 Setting a Destination Using an Address Book P.134
4 Sending the Scanned File on the Network P.138
Step Procedure See Page
1 Setting a Destination Using an Address Book P.134
2 Sending the Scanned File on the Network P.138
To Next Page
Loading...
Need help?
General
