Fuji Xerox DocuCentre SC2020 - Default Settings

9 Tools
184
Tools
9
 Software Download
Purpose:
To enable or disable download of firmware updates.
Values:
 Display Network Information
Purpose:
To show or hide network information in the message field of the Services Home screen.
Value:
 Login Attempts
Note • Login Attempts feature is available only when [Panel Lock Set] is set to [Enable].
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator
in the [Admin Settings] and [Report / List] menu.
Values:
Default Settings
Use the [Default Settings] menu to modify the defaults for the Copy, Scan Menu, or Fax.
Copy Defaults
Purpose:
To modify the defaults for the Copy menu.
Note • Bold values are the factory default menu settings.
 Output Color
Purpose:
To select color or black and white copying.
Values:
Disable Disables firmware updates.
Enable Enables firmware updates.
Show IPv4 Address Shows the IPv4 address of the machine on the <Services Home>
screen.
Show Host Name Shows the host name of the machine on the Services Home
screen.
Hide Network Information Does not show network information on the Services Home screen.
Off Does not allow an administrator to log in
after one error entry attempt.
On 5 Sets the number of error entry attempts
allowed when an administrator logs in.
1-10
Full Color Copies in color mode.
Black & White Copies in black and white mode.