2 Environment Settings
30
Environment Settings
2
Supported Environment
This section describes the environment settings needed to use the machine's print, scan and
fax features.
Print Feature
The machine can be connected directly to a computer for use as a local printer, or can be
connected to a network for use as a network printer.
îš„ Use as a Local Printer
Connect the machine to a computer with a USB cable.
îš„ Use as a Network Printer
Print from network-connected computers using the TCP/IP protocol.
To use the machine as a network printer, you need to activate the port to use for printing.
z
LPD: Activate this setting when using the LPD port.
z
Port9100: Activate this setting when using the Port9100 port.
For information on how to set TCP/IP, refer to "Setting the Network Environment" (P.34).
For information on how to activate a communication port, refer to "Activating the Communication Port To Use" (P.39).
Scan Feature
The machine supports the following Scan functions:
îš„ Using the USB connection
îš„ Scan with PC application
Uses the USB connection to import scan data in a computer.
To use this function, you must install the scan driver from the Driver CD Kit CD-ROM.
Note • To install the scan driver, follow the instructions provided in the manual (HTML file) included on the
CD-ROM.
For information on how to use this feature, refer to "Scanning to a Computer" (P.127).
Network Connection
LPD / Port9100
Local Connection
USB
To Next Page
Loading...
Need help?
General
