Fuji Xerox DocuCentre SC2020 User Manual

9 Tools
200
Tools
9
To specify the paper loaded in Tray 2.
Values:
Note • When using a non-standard size envelope, specify the size without the flap in [Custom Size].
Tray Priority
Purpose:
To set the priority order of the paper trays for automatic tray selection. If paper trays loaded
with the same paper size and type exists, the paper tray is selected according to this priority
order.
Display Tray
Prompt
Enter a check to display a popup message that prompts to set Type and Size when
paper is loaded in Tray 2. The factory default is on (check).
Size Auto Detect
Custom Size Length(x) 210 mm
(8.3 inches)
Specifies the length of the
custom size paper.
182-432 mm
(7.2-17.0 inches)
Width(y) 297 mm
(11.7 inches)
Specifies the width of the
custom size paper.
140-297 mm
(5.5-11.7 inches)
Type Plain (60-89 gsm)
Plain Reload
Bond (90-105 gsm)
Bond Reload
Recycled (60-105 gsm)
Recycled Reload
Punched (60-89 gsm)
Letterhead (60-89 gsm)
Heavyweight (HW) (106-169 gsm)
HW Reload
Extra Heavyweight (X-HW) (170-256 gsm)
X-HW Reload
Gloss (106-169 gsm)
Gloss Reload
Heavyweight Gloss (170-256 gsm)
HW Gloss Reload
Labels (106-256 gsm)
Pre-Printed (60-89 gsm)
Colored (60-89 gsm)
Postcard
Postcard Reload

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English