Fuji Xerox DocuCentre SC2020

5 Copy
92
Copy
5
Note • Bold values are the factory default menu settings.
Edge Erase
To specify the top and bottom margins of the copy.
Note • Bold values are the factory default menu settings.
1 Select the [Output] tab, and then select [Edge
Erase].
2 Select [ ] or [ ], or use the number pad to
enter the desired value.
Off Does not perform Pages Per Side printing.
2-Up Automatically reduces the original pages to fit onto one sheet of
paper.
Top / Bottom 2 mm (0.1")
0 J 50 mm (0.0 J 2.0")
Specify the value in increments of 1 mm (0.1
inch).
Left / Right 2 mm (0.1")
0 J 50 mm (0.0 J 2.0")
Specify the value in increments of 1 mm (0.1
inch).
Middle 0 mm (0")
0 J 50 mm (0.0 J 2.0")
Specify the value in increments of 1 mm (0.1
inch).