9 Tools
196
Tools
9
îš„ Delayed Send
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once
[Delayed Send] mode is activated, the machine stores all of the documents to be faxed into
its memory and sends them at the specified time. After faxing in the [Delayed Send] mode
is complete, the data in the memory is cleared.
Values:
Note • A maximum of 19 delayed fax jobs can be stored in the machine.
Tray Management
Use the [Tray Management] menu to define the print media loaded in Tray 1 and Tray 2.
Note • Bold values are the factory default menu settings.
Tray Settings
Purpose:
To configure tray settings.
îš„ Tray 5 (Bypass)
Purpose:
To specify the paper loaded in Tray 5 (bypass).
Values:
Folio (8.5 x 13")
Letter (8.5 x 11")
A3 (297 x 420 mm)
B4 (257 x 364 mm)
A4 (210 x 297 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
8K (270 x 390 mm)
21:00/9:00 PM Specify the fax transmission start time when sending a fax at a
specified time.
0:00 - 23:59 /
1:00 - 12:59 AM/PM
Display Tray
Prompt
Enter a check to display a popup message that prompts to set Type and Size when
paper is loaded in Tray 5 (bypass). The factory default is on (check).
Use Driver
Settings for
Print Job
Enter a check to use the Size and Type set on the print driver. The factory default
is off (blank).
To Next Page
Loading...
Need help?
General
