9 Tools
194
Tools
9
Values:
îš„ File Name
Purpose:
To specify whether to add a prefix or suffix to the file name.
Values:
îš„ Create Folder
Purpose:
To specify whether to create a folder when saving scanned images.
Values:
Fax Defaults
Purpose:
To modify the defaults for the [Fax] menu.
Note • The FAX service cannot be used unless you set up a region code under [Region].
• Bold values are the factory default menu settings.
îš„ Resolution
Purpose:
To specify the scan resolution to improve the output quality.
Values:
Note • Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving
device.
îš„ 2 Sided Scanning
Purpose:
To scan both sides of a sheet of paper.
Small Sets the Quality/File Size level to [Small].
Normal Sets the Quality/File Size level to [Normal].
Large Sets the Quality/File Size level to [Large].
Auto Does not add a prefix or suffix to the file name.
Add Prefix Adds a prefix to the file name.
Add Suffix Adds a suffix to the file name.
Off Does not create a folder when saving a scanned image.
On Creates a folder when saving a scanned image.
Standard Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The
Super Fine mode is enabled only if the remote machine also
supports the Super Fine mode. See the notes below.
Photo Suitable for documents containing photographic images.
1 Sided Scans one side of a document.
To Next Page
Loading...
Need help?
General
