Fuji Xerox DocuCentre SC2020 User Manual

5 Copy
88
Copy
5
1 Select the [Quality] tab, and then select
[Sharpness].
2 Select the desired setting, and then select [OK].
Note • Bold values are the factory default menu settings.
Saturation
To adjust the amount of colors of the copy to make the colors darker or lighter than the
original.
1 Select the [Quality] tab, and then select
[Saturation].
2 Select the desired setting, and then select [OK].
Note • Bold values are the factory default menu settings.
Sharpen Makes the copy image sharper than the original.
Normal The color clarity of the image is the same as the original.
Soften Makes the copy image softer than the original.
Vivid Makes the copy image sharper than the original.
Normal The color clarity of the image is the same as the original.
Pastel Makes the copy image softer than the original.

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English