9 Tools
172
Tools
9
Values:
z
Original Size Detected
Purpose:
To specify the size of paper to be automatically detected when you use standard sizes of
a document or the machine is set to detect sizes of a document.
Note • The settings only affect the scanning from the document feeder.
Values:
z
Display Brightness
Purpose:
To adjust the screen brightness of the control panel.
Values:
z
Audio
Purpose:
To configure settings for tones emitted by the machine during operation or when a
warning message appears.
Values:
Millimeters (mm) Selects millimeter as the default measurement unit.
Inches (") Selects inch as the default measurement unit.
Paper Size Settings A/B Series (8K/16K) A/B series documents are automatically
detected.
Inch Series Inch series documents are automatically
detected.
Switch Paper Size 1 8.5 x 13" Sets 8.5 x 13" as the alternative document
size that can be detected automatically.
8.5 x 14" Sets 8.5 x 14" as the alternative document
size that can be detected automatically.
Switch Paper Size 2 B5 Sets B5 as the alternative document size that
can be detected automatically.
16K Sets 16K as the alternative document size
that can be detected automatically.
5 Sets the brightness in 10 levels, with 10 being the brightest.
1-10
Panel Select Tone Off Does not emit a tone when the control panel
input is correct.
Soft Emits a tone when the control panel entry is
correct.
Normal
Loud
To Next Page
Loading...
