Managing the Machine
243
Maintenance
12
When the same command is written two or more times in one e-mail, the second and
subsequent commands are ignored.
Example of Commands
z
When the read only password is “ronly”, and to check the machine status:
#Password ronly
#Status
#NetworkInfo
Command Parameter Description
#Password Password Use this command at the top of the e-mail when
a password for read only is set. You can omit this
command when the password is not set.
#NetworkInfo - Set this when you want to check information on
the network settings list.
#Status - Set this when you want to check the machine
status.
To Next Page
Loading...
