Fuji Xerox DocuCentre SC2020 User Manual

13 Problem Solving
268
Problem Solving
13
016-764
016-765
016-766
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Contact the SMTP server administrator.
016-767
016-768
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the e-mail address, and try scanning again.
016-786
016-790
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the network cable is connected properly. If there is no
problem with the network cable, contact your server administrator.
016-799
016-921
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
016-985
016-986
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Lower the resolution or change the file format of the scanned image,
and retry scanning.
017-970
017-971
017-972
017-973
017-974
017-975
017-976
017-977
017-978
017-979
017-980
017-986
017-987
017-988
017-989
Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover.
031-521 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Confirm the login-able computers with your system administrator.
031-522 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the login name (domain name and user name) and
password are correct.
031-523 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the share name you specified.
031-524 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the number of users who use the server at the same time is not
exceeding the upper limit.
031-525 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the specified user can read and write a file at the storage
location.
031-526 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the DNS connection, or check if the forwarding destination
server is registered with DNS.
031-527 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Set the DNS address, or set the forwarding destination server address
as an IP address.
Error Code Remedy

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English