Fujitsu PRIMERGY RX4770 M5 User Manual

Important note
After replacing a defective memory module, please check if the error
counter has been reset automatically. If the memory slot is still marked
as failed, please reset the error counter manually using one of the
methods below.
Using ServerView Maintenance Tools (Windows only)
▶
Launch the ServerV
iew Maintenance Tools:
Start > Apps > Fujitsu > Maintenance Tools
▶
Choose the Memory status tab.
▶
Select the memory module which shows the pre-failure status.
▶
Click on Reset Status.
The Reset Status
button will only be available if the selected memory
module contains errors.
▶
Ensure that all pre-fail/fail status issues have been resolved in ServerV
iew
Operations Manager.
Using the command line interface (Linux/VMware only)
The memory error counter can be reset using the meclear utility which is part
of the ServerView agents for Linux.
meclear (Memory Module Error Counter Reset Utility) allows to reset
the error count collected for a memory module, for example after it has
been replaced.
For more Information, see the meclear manual pages.
▶
Log in as root.
▶
Enter the command below
, followed by [ENTER]:
/usr/sbin/meclear
▶
Select the number of a memory module with a status other than OK or Not
available.
▶
Repeat the step above until all memory modules show the OK status.
Basic software procedures
100 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English