Fujitsu PRIMERGY RX4770 M5 User Manual

For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.3.10 Verifying the memory mode
If a memory module fails, the server will reboot and the defective module will
be disabled. As a result, the current operation mode (e.g. Mirrored Channel
mode) may no longer be available due to a lack of identical memory module
pairs. In this case, the operation mode will automatically revert to Independent
Channel Mode.
For more information on memory operation modes available for your
server
, see "Modes of operation" on page 243.
After replacing the defective module(s) the memory operation mode is
automatically reset to its original state. It is recommended to verify that the
operation mode has been correctly
.
▶
Enter the BIOS.
▶
Select the Advanced menu.
▶
Select Memory Status and verify that none of the memory modules are
marked as Failed.
▶
Select Memory Configuration to verify Memory Mode of Operation.
▶
Save your changes (if applicable) and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.3.11 Verifying the system time settings
This task only applies to Linux and VMware environments.
After the system board has been replaced, the system time is set automatically.
By default, the R
TC (Real Time Clock) time standard is set as the local time.
Basic software procedures
RX4770 M5 Upgrade and Maintenance Manual 103

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English