6 Power supply unit (PSU)
6.1
Safety notes
CAUTION
▶
Do not disassemble the PSU. Doing so may cause electric shock.
▶
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server
, wait for hot components to cool
down before removing the PSU.
▶
When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
▶
The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
▶
For more information, see "Important information" on page 29.
6.2 Basic information
The server is equipped with two hot-plug PSUs that automatically adjust to any
mains voltage in the range of 100
V - 240 V.
If one hot-plug PSU fails, the second hot-plug PSU in the redundant
configuration ensures that the operation can continue uninterrupted and the
defective PSU can be replaced during operation (hot-plug).
CAUTION
The server supports a mains voltage in the range of 100 V to 240 V
(1600 W PSUs).
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
PSU configurations
Configuration PSU1 PSU2
1 1600 W 1600 W
RX4770 M5 Upgrade and Maintenance Manual 121
To Next Page
Loading...
