Fujitsu PRIMERGY RX4770 M5 User Manual

4.4.2 Extending the server out of the rack
CAUTION
▶
Use the anti-tilt plate to prevent the rack from tipping when
installing the rack. Pulling the server out of the rack without having
installed the anti-tilt plate may cause the rack to tip over
.
▶
Be careful not to pinch fingers or clothes when sliding out the
server or pushing it back. Failure to do so may cause injury.
▶
For maintenance procedures on the system board the rack must be
pulled out of the server and put on a even surface.
▶
Be careful not to damage the rack rails when sliding out the server
or pushing it back. Damaged rack rails may cause injury.
▶
For more information, see "Important information" on page 29.
▶
Be careful not to disconnect external cables from the I/O panel and
expansion cards.
▶
If you are not using a Cable Management Arm (CMA), ensure that the rear
cables are long enough not to be strained or damaged when extending the
server out of the rack.
Figure 3: Extending the server out of the rack
Basic hardware procedures
48 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English