Jumper Status Description
JP1
JP2
PWD CLR /
BIOS-RCVR
Default (place to keep the jumper)
Password Clear enabled
This jumper setting will permanently
delete the current BIOS password and
apply default BIOS settings.
Recovery BIOS enabled
JP3
BIOS Flash
W
rite Protect
Default
BIOS Flash Write Protect enabled
16.4 Minimum startup configuration
Field Replaceable Units
(FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Appendix A
RX4770 M5 Upgrade and Maintenance Manual 433
To Next Page
Loading...
Need help?
General