Fujitsu PRIMERGY RX4770 M5 - Replacing the Microsd Card

▶
Install the new Dual microSD 64GB Enterprise, see "Installing the Dual
microSD 64GB Enterprise" on page
344.
Concluding steps
▶
Install the riser module 3/4, see "Installing the riser module 3/4 and 6/7" on
page 62.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord (AC PSU)" on page 58.
▶
"Switching on the server" on page 59.
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see "Software
configuration" on page
346.
14.7.5 Replacing the microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools:
– a pair of side-cutting pliers
–
Phillips PH2 / (+) No. 2 screw driver (for housing cover)
Preliminary steps
▶
"Locating the defective server" on page
43.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 47.
System board and components
RX4770 M5 Upgrade and Maintenance Manual 351