EasyManua.ls Logo

Fujitsu PRIMERGY RX4770 M5 - Removing the Irmc Microsd Card

Fujitsu PRIMERGY RX4770 M5
455 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Concluding steps
"Installing the riser module" on page
65.
Install the riser module 6/7, see "Installing the riser module" on page 65.
"Reassembling" on page 53.
"Connecting the power cord (AC PSU)" on page 58.
"Switching on the server" on page 59.
14.5.3 Removing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for housing cover)
Preliminary steps
"Shutting down the server" on page
45.
"Disconnecting the power cord" on page 46.
"Getting access to the component" on page 47.
Remove the riser module 6/7, see "Removing the riser module 3/4 and 6/7"
on page 61.
"Removing the riser module" on page 64.
System board and components
RX4770 M5 Upgrade and Maintenance Manual 329

Table of Contents

Related product manuals