EasyManua.ls Logo

Fujitsu PRIMERGY RX4770 M5 - Removing the OCP Dummy Cover

Fujitsu PRIMERGY RX4770 M5
455 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.9.2 Removing the OCP dummy cover
Figure 21: Removing the dummy cover
Pull out the dummy cover
.
CAUTION
Keep the dummy cover for future use.
If you remove an OCP module and do not immediately replace it
with a new one, a dummy cover must be reinstalled in the bay to
comply with applicable EMC regulations and satisfy cooling
requirements.
Basic hardware procedures
68 Upgrade and Maintenance Manual RX4770 M5

Table of Contents

Related product manuals