▶
Install all riser modules and the RAID card, see "Expansion cards and riser
cards" on page 190.
▶
"Reassembling" on page
53.
▶
"Installing the server in the rack" on page 55.
▶
"Connecting the power cord (AC PSU)" on page 58.
▶
"Switching on the server" on page 59.
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
14.5 iRMC microSD card
14.5.1 Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key
, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the “ServerView embedded Lifecycle
Management (eLCM)” user guide.
14.5.2 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for housing cover)
Preliminary steps
▶
"Shutting down the server" on page
45.
▶
"Disconnecting the power cord" on page 46.
System board and components
RX4770 M5 Upgrade and Maintenance Manual 327
To Next Page
Loading...
Need help?
General