Fujitsu PRIMERGY RX4770 M5 User Manual

The DCPMM (NVM/LRDIMM) operation mode can be configured in the
BIOS Setup. For more information, see the corresponding BIOS manual.
10.5 Removing memory modules
For memory slots from A to M valid for the bottom system board.
Field Replaceable Unit
(FRU)
Hardware: 20 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for housing cover)
For memory slots from N to Z valid for the top system board.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for housing cover)
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
For memory slots from A to M valid for the bottom system board.
▶
"Suspending BitLocker functionality" on page
85.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Removing the server from the rack" on page 49.
▶
"Getting access to the component" on page 47.
Main memory
262 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English