EasyManua.ls Logo

Fujitsu PRIMERGY RX4770 M5 - Indicator of the Hot-Plug System Fan; Acoustic Indicators

Fujitsu PRIMERGY RX4770 M5
455 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
! (Exclamation mark) indicator (3)
Status Description
off The PSU is operating properly.
orange on A PSU failure has been detected. Possible causes:
Over/under voltage
Overheating
Fan failure
PSU failure
Overload
16.2.4 Indicator of the hot-plug system fan
A fan status indicator (LED on the system board) is assigned to each system
fan. The status indicators are not visible unless the housing is open.
Fan status indicator (LED on the system board)
Status Description
lights orange Possible fan failure (rotation speed less than 70% of the
original speed) or fan failure.
16.2.5 Acoustic indicators
PEI Beep Codes
Pre-EFI Initialization (PEI) - memory Initialization (bootblock)
Appendix A
430 Upgrade and Maintenance Manual RX4770 M5

Table of Contents

Related product manuals