Fujitsu PRIMERGY RX4770 M5 User Manual

Enabling the boot watchdog using the iRMC web interface
▶
Log in to the ServerV
iew iRMC web interface.
▶
Select the Settings menu.
▶
Open the Server Management page.
▶
In the Boot Watchdog group, check the Enable Boot Watchdog option.
The Enable Boot Watchdog option must be selected.
▶
Select Reset from the Watchdog Action list.
▶
Click Apply for the changes to take effect.
For more information on iRMC settings, see the iRMC user guides.
5.3.9 Enabling replaced components in the BIOS
When a CPU, an expansion card, or a memory module fails, the defective
component will be set to Disabled or Failed in the BIOS. The server will then
reboot with only the intact hardware components remaining in the system
configuration. After replacing the defective component, it needs to be
reenabled in the BIOS.
▶
Enter the BIOS.
▶
Select the Advanced menu.
▶
Select the status menu of the desired component:
▶
Select CPU Status for CPUs.
This option is only available for multi-processor systems.
▶
Select Memory Status for memory modules.
▶
Select PCI Status
for expansion cards.
▶
Reset replaced components to Enable.
▶
Save your changes and exit the BIOS.
Basic software procedures
102 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English