Fujitsu PRIMERGY RX4770 M5 User Manual

Using the ServerView Update Manager
For more information on how to update the expansion card firmware using the
ServerV
iew Update Manager or Update Manager Express (UME), see the
following manuals:
–
ServerView Update Manager: "ServerView Update Management" user guide
–
ServerView Update Manager Express: "Local System Update for
PRIMERGY Servers" user guide
Using the flash tool
The latest firmware files are available as ASPs (Autonomous Support
Packages) for Windows or as Linux tools from the Fujitsu support web pages
at:
https://ts.fujitsu.com/support/
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
5.3.4 Enabling Option ROM scan
In order to configure an expansion card that has been installed or replaced, the
Option ROM of the card has to be enabled in the BIOS. The firmware of the
card is called by the BIOS upon reboot and can be entered and configured.
Option ROM can be enabled permanently (e.g. in case of a boot controller that
may require frequent setup) or temporarily for one-time configuration. When
permanently enabling the Option ROM of a controller in a legacy BIOS, keep in
mind that only two Option ROMs can be activated in the BIOS at a time.
▶
Enter the BIOS.
▶
From the Advanced menu select Option ROM Configuration.
▶
Identify the desired PCI slot and set its Launch Slot # OpROM setting to
Enabled.
▶
Save your changes and exit the BIOS.
Up to two Option ROMs can be activated in the BIOS at a time.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
Basic software procedures
94 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English