Figure 110: Removing the expansion card - example: riser module 3/4
▶
Carefully remove the expansion card from its slot.
▶
Install a slot bracket in the unused PCI slot, see "Installing a slot bracket"
on page 172.
Concluding steps
▶
For slot 3, 4, 5, 6 and 7: Install the corresponding riser module, see
"Handling riser modules" on page
60.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord (AC PSU)" on page 58.
▶
"Switching on the server" on page 59.
▶
"Resuming BitLocker functionality" on page 108.
9.7.4 Replacing an expansion card
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Software: 5 minutes
Expansion cards and backup units
210 Upgrade and Maintenance Manual RX4770 M5