Concluding steps
â–¶
"Installing the FBU carrier" on page
231.
â–¶
Connect the FBU adapter cable to the TFM, see "Installing the new TFM"
on page 222.
â–¶
Install the air duct on the top system board, see "Installing the CPU air duct"
on page 74
â–¶
"Installing the fan cage" on page 71.
â–¶
"Reassembling" on page 53.
â–¶
"Connecting the power cord (AC PSU)" on page 58.
â–¶
"Switching on the server" on page 59.
â–¶
"Updating expansion card firmware" on page 93.
The recalibration of the FBU starts automatically, and finishes within a
few minutes.
Expansion cards and backup units
238 Upgrade and Maintenance Manual RX4770 M5