Single-rank/dual-rank RDIMM modules - 4 CPUs populated (if all modules
have different capacity)
–
Configurations are defined so that the waste for spare-memory is minimized;
performance is not prioritized, in other words channels will be filled with two
modules before populating new channel.
–
If two dif
ferent capacities for rank sparing mode are ordered, populate them
on different CPUs, so that on one CPU is only one type; for example 12
modules ordered (8x 8 GB and 4x 16 GB) then use the type with bigger
capacity modules for CPU 1.
Main memory
RX4770 M5 Upgrade and Maintenance Manual 251
To Next Page
Loading...
Need help?
General