Status Description
flashing orange Non-CSS component failure detected.
Possible causes:
–
System is out of the specified temperature range
– Defective sensor
– CPU error
– Error detected by server management software
HDD/SSD activity indicator (4)
Status Description
flashing green Data access in progress.
Power-on indicator (5)
Status Description
off The server is switched off.
green on – The server has been switched on but Power Cycle
Delay settings delay it from turning on for a
specified time.
–
The server is switched on and operating normally.
flashing green slowly The BMC firmware is starting up after the server has
been connected to the mains.
Appendix A
418 Upgrade and Maintenance Manual RX4770 M5
To Next Page
Loading...
