Fig. 93: Routing -> Multicast -> Options
The Routing -> Multicast -> Options menu consists of the following fields:
Fields in the Options Basic Settings menu
Field Description
IGMP Status Select the IGMP status.
Possible values:
• Auto: Multicast is activated automatically for hosts if the hosts
open applications that use multicast.
• Active: Multicast is always on.
• Inactive (default value): Multicast is always off.
Mode Only for IGMP Status = enabled
Select Multicast Mode.
Possible values:
• Compatibility Mode (default value): The router uses IG-
MP version 3. If it notices a lower version in the network, it
uses the lowest version it could detect.
• Version 3 only: Only IGMP version 3 is used.
Maximum groups Enter the maximum number of groups to be permitted, both in-
ternally and in reports.
Funkwerk Enterprise Communications GmbH
12 Routing
bintec W1002/W1002n/W2002/WIx040/WIx065 207
To Next Page
Loading...
Need help?
General
