14.2.1.1 New
Choose the New button to set up new tunnel profiles.
Fig. 105: VPN->L2TP->Tunnel Profiles ->New
The VPN->L2TP->Tunnel Profiles ->New menu consists of the following fields:
Fields in the Tunnel Profiles Basic Parameters menu
Field Description
Description Enter a description for the current profile.
The device automatically names the profiles L2TP
and numbers them, but the value can be changed.
Local Hostname
Enter the host name for LNS or LAC.
• LAC: The Local Hostname is used in outgoing tunnel setup
messages to identify this device and is associated with the
Remote Hostname of a tunnel profile configured on the LNS.
These tunnel setup messages are SCCRQs (Start Control
14 VPN Funkwerk Enterprise Communications GmbH
244 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
