14.4.1.1 New
Choose the New button to set up new GRE tunnels.
Fig. 110: VPN->GRE->GRE Tunnels->New
The VPN->GRE->GRE Tunnels->Newmenu consists of the following fields:
Fields in the GRE Tunnels Basic Parameters menu
Field Description
Description Enter a description for the GRE tunnel.
Local GRE IP Address
Enter the source IP address of the GRE packets to the GRE
partner.
If no IP address is given (this corresponds to IP address
0.0.0.0), the source IP address of the GRE packets is selected
automatically from one of the addresses of the interface via
which the GRE partner is reached.
Remote GRE IP Ad-
dress
Specify the destination IP address of the host or network to
which the packets are to be sent through the GRE tunnel.
Default Route
If you enable the Default Route, all data is automatically routed
to one connection.
The function is disabled by default.
14 VPN Funkwerk Enterprise Communications GmbH
262 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
