Fig. 118: Firewall -> Policies -> QoS -> New
The Firewall -> Policies -> QoS -> New menu consists of the following fields:
Fields in the QoS Configure QoS Interface menu
Field Description
Interface Select the interface on which bandwidth management is to be
carried out.
Traffic Shaping Select whether you want to activate bandwidth management for
the selected interface.
The function is activated with Enabled.
The function is disabled by default.
Specify Bandwidth Only for Traffic Shaping = Enabled.
Enter the maximum available bandwidth in kbps for the selected
interface.
Filter rules This field contains a list of all configured firewall policies for
which QoS was enabled (Apply QoS = Enabled). The follow-
ing options are available for each list entry:
• Use: Select whether this entry should be assigned to the QoS
interface. The option is deactivated by default.
• Bandwidth: Enter the maximum available bandwidth in kbps
for the service specified under Services. 0 is entered by de-
Funkwerk Enterprise Communications GmbH
15 Firewall
bintec W1002/W1002n/W2002/WIx040/WIx065 281
To Next Page
Loading...
Need help?
General
