Fig. 127: Local Services->DNS->Domain Forwarding->New
The Local Services->DNS->Domain Forwarding->New menu consists of the following
fields:
Fields in the Domain ForwardingForwarding Parameters menu
Field Description
Forwarding Select whether a host or domain is to be forwarded.
Possible values:
• Host (default value)
• Domain
Host Only for Forward = Host
Enter the name of the host to be forwarded.
The entry can also start with the wildcard *, e.g. *.funkwerk.com.
If a name is entered without a full stop, once you confirm with
OK " <Default Domain>. " " is added.
Domain Only for Forward = Domain
Enter the name of the domain to be forwarded.
The entry can also start with the wildcard *, e.g. *.funkwerk.com.
If a name is entered without a full stop, once you confirm with
16 Local services Funkwerk Enterprise Communications GmbH
298 bintec W1002/W1002n/W2002/WIx040/WIx065