Field Description
Trigger
Enter here the temperature limit value (min/max).
Possible values:
• Temperature above
• Temperature below
Action
Select the action that is to follow the state or state transition
defined in Trigger.
Possible values:
• Enable (default value)
• Disabled
Interface
Select the interface via which the action is to be carried out.
Possible values:
• Relay (default value): The overstepping of the limit is coupled
with the relay.
• <Interface>: On overstepping the temperature limit, the se-
lected interface is turned off.
Funkwerk Enterprise Communications GmbH
16 Local services
bintec W1002/W1002n/W2002/WIx040/WIx065 323
To Next Page
Loading...
