stored in the working memory (RAM). The contents of the RAM are lost if the device is
switched off. So if you modify your configuration and want to keep these changes for the
next time you start your device, you must save the modified configuration in the flash
memory before switching off: Save Configuration button in the Funkwerk Configuration
Interface navigation area. This configuration is then saved in the flash in a file with the
name boot. When you start your device, the boot configuration file is used by default.
Operations
The files in the flash memory can be copied, moved, erased and newly created. It is also
possible to transfer configuration files between your device and a host via HTTP.
Fig. 150: Maintenance->Software & Configuration->Options
The Maintenance->Software & Configuration->Options menu consists of the following
fields:
Fields in the Configuration Management Currently installed Software menu
Field Description
BOSS The current software version loaded on your device is displayed
here.
System Logic
The current system logic loaded on your device is displayed
here.
Fields in the Configuration ManagementSoftware and Configuration Options menu
17 Maintenance Funkwerk Enterprise Communications GmbH
334 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
