EasyManua.ls Logo

Funkwerk W1002 - Page 408

Funkwerk W1002
437 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B channel. With this setting, an external caller put on hold hears the
PBX's on-hold music.
Hook flash The use of the inquiry, brokerage and three-party conference spe-
cial features in T-Net and certain performance features of some
PBXs is only possible with the hook flash function (long flash) of the
signal key on the telephone. On modern telephones, this key is in-
dicated with an "R".
Host name A name used in IP networks instead of the corresponding address.
A host name consists of an ASCII string that uniquely identifies the
host computer.
HTTP HyperText Transfer Protocol
Hub Network component used to connect several network components
together to form a local network (star-shaped).
IAE ISDN connection unit, ISDN connection socket.
ICMP Internet Control Message Protocol
ICV Integrity Check Value
Identify malicious
callers (intercept)
You have to request this performance feature from T-Com. The
company will provide you with further information on the procedure.
If you enter code 77 during a call or after the caller has ended a call
(you hear the engaged tone from the exchange), the caller's tele-
phone number is stored in the exchange. ISDN telephones can also
use separate functions for this performance feature. For more in-
formation on this function, please see your user's guide.
IEEE The Institute of Electrical and Electronics Engineers (IEEE). A large,
global association of engineers, which continuously works on stand-
ards in order to ensure different devices can work together.
IETF Internet Engineering Task Force
Index The index from 0...9 is fixed. Every external multiple subscriber
number entered is assigned to an index. You need this index when
configuring performance features using the telephone's codes, e.g.
configuring "Call forwarding in the exchange" or "Define telephone
number for the next external call".
Infrastructure mode A network in infrastructure mode is a network that contains at least
one access point as the central point of communication and control.
In a network in infrastructure mode, all clients communicate with
Glossary Funkwerk Enterprise Communications GmbH
396 bintec W1002/W1002n/W2002/WIx040/WIx065

Table of Contents

Other manuals for Funkwerk W1002

Related product manuals