Property Value
Standards IEEE 802.11a,b,g,d,h,i;
IEEE 802.3,
IEEE 802.3af,
IEEE 802.1q (VLAN Tagging)
Standards & Guidelines R&TTE Directive 1999/5/EC
EN 60950 (IEC60950); EN 300 328-1/2; ETSI EN
301 489-1/17; EN 60101-1-2 (medicine)
e1 e-mark (automotive) LATER)
Buttons Reset and reset to ex work settings possible with
two buttons (1x config reset, 1x HW reset)
Security features WEP, WPA, WPA2, Access Control List, Network
Name Broadcast can be deactivated
WEP key length (bit) 40 (64) or 104 (128)
Software supplied ComPoint Manager
BOSS operating system
Printed documentation supplied Quick Reference
Safety notices
R&TTE Compliance Information
Online documentation User's Guide
Antenna Diversity
Note
The two antennas have different functions. One is used both to transmit and receive,
the other is only used to receive. During reception, the AP (Access Point) checks
which antenna is receiving a better signal. This is then used for decoding. Since the
two antennas are approximately one wavelength apart, the difference in signal
strength can be quite considerable.
6 Technical data Funkwerk Enterprise Communications GmbH
40 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
