6 Data Recorder Editing files
6-32 Edition 4 (05/2014) DMS Go+
Reloading a Microgrid
You can reload a previously created Microgrid at any
time in order to save other readings to it. You have to se
-
lect the data point containing the corresponding reading
first (
see Section Selecting individual measuring
points, page 6-16).
– Press the center key of the keypad long. The func-
tions of the function keys change.
– Press the function key 1 (function µGRID). The Mi-
crogrid is displayed.
– Press the function key 1 (function EXIT). The Micro-
grid is closed and you will again see the normal file
structure.
To Next Page
Loading...
