GPT-10000 Series User Manual
10
GPT-10000 Series Overview
Series lineup
The GPT-10000 Series Safety Analyzers are AC/DC withstanding
voltage, insulation resistance, ground bond and continuity safety
analyzers.
By and large, GPT-10000 Series has 2 major categories, one is GPT-
12XXX models, and the other is GPT-15XXX models. The subordinate
models of 2 categories share the same test functions but with different
specifications. We use the term “X” for the 2nd digit of model names
described below to stand for both 2 categories in common.
The GPT-1X001 is AC withstanding voltage and continuity tester,
the GPT-1X002 is AC/DC withstanding voltage and continuity
tester and the GPT-1X003 is AC/DC withstanding voltage,
insulation resistance and continuity tester. The GPT-1X004 includes
all the test functions of the other models, plus the ground bond
testing. See the following Lineup Overview for more details.
In particular, the special unit, GPT-15012, which has different
definition in rules of model name order, is a AC withstanding
voltage and insulation resistance tester for specific applications.
The GPT-10000 Series can store up to 100 manual tests, as well as
run up to 10 manual tests sequentially as an automatic test,
allowing the safety analyzers to accommodate any number of
safety standards, including IEC, EN, UL, CSA, GB, JIS and others.
Note: Throughout this user manual, the terms ACW, DCW, IR, GB
and CONT refer to AC Withstanding, DC Withstanding, Insulation
Resistance, Ground Bond and Continuity testing, respectively.
To Next Page
Loading...
