GW Instek GPT-10000 Series User Manual

GPT-10000 Series User Manual
242
MANU:IR:CONTact
Set
Query
Description
Sets or returns the CONTACT CHK function on or off.
Note: An “Err” message will be shown on display if
the learned reference value is less than 30uA. An
“LEARNING < 30uA” message will be returned after
using the query command “SYSTem:ERRor ?” in
remote control.
Syntax
Query Syntax
MANU:IR:CONTact {ON|OFF}
MANU:IR:CONTact?
Parameter/
Return parameter
ON
CONTACT CHK in IR test ON
OFF
CONTACT CHK in IR test OFF
Example
MANU:IR:CONT OFF
Sets the CONTACT CHK off in IR test.
MANU:IR:FILTer
Set
Query
Description
Sets or returns the FILTER function for IR test.
Syntax
Query Syntax
MANU:IR:FILT {OFF | LEVEL1 | LEVEL2 | LEVEL3 |
LEVEL4 | LEVEL5 | LEVEL6 | LEVEL7 | LEVEL8 | LEVEL9
| LEVEL10}
MANU:IR:FILT?
Parameter/
Return parameter
OFF
FILTER in IR test Off
LEVEL 1
FILTER in IR test Level 1
LEVEL 2
FILTER in IR test Level 2
LEVEL 3
FILTER in IR test Level 3
LEVEL 4
FILTER in IR test Level 4
LEVEL 5
FILTER in IR test Level 5
LEVEL 6
FILTER in IR test Level 6
LEVEL 7
FILTER in IR test Level 7
LEVEL 8
FILTER in IR test Level 8
LEVEL 9
FILTER in IR test Level 9
LEVEL 10
FILTER in IR test Level 10

GW Instek GPT-10000 Series Specifications

General

Brand	GW Instek
Model	GPT-10000 Series
Category	Measuring Instruments
Language	English