GW Instek GPT-10000 Series User Manual

REMOTE CONTROL
239
MANU:IR:WAITtime
Set
Query
Description
Sets or returns the IR wait time in seconds. The
test must first be in IR mode before this command
can be used.
Syntax
Query Syntax
MANU:IR:WAITtime <NR2>
MANU:IR:WAITtime?
Parameter/
Return parameter
<NR2>
0 ~ 999.9 seconds
Example
MANU:IR:WAIT 10.1
Sets the IR wait time to 10.1 s.
MANU:IR:RAMPdown
Set
Query
Description
Sets or returns the IR Ramp Down Time in
seconds. The test must first be in IR mode before
this command can be used.
Syntax
Query Syntax
MANU:IR:RAMPdown <NR2>
MANU:IR:RAMPdown?
Parameter/
Return parameter
<NR2>
0 ~ 999.9 seconds
Example
MANU:IR:RAMP 999.9
Sets the IR ramp down time to 999.9 seconds.
MANU:IR:GROundmode
Set
Query
Description
Sets or returns the IR Ground Mode. The test must
first be in IR mode before this command can be
used.
Syntax
Query Syntax
MANU:IR:GROundmode {ON|OFF}
MANU:IR:GROundmode?
Parameter/
Return parameter
ON
IR Ground Mode ON
OFF
IR Ground Mode OFF

GW Instek GPT-10000 Series Specifications

General

Brand	GW Instek
Model	GPT-10000 Series
Category	Measuring Instruments
Language	English