GETTING STARTED
23
Line Voltage Connection and Power Up
The GPT-10000 accepts line voltages of
100 - 240V at 50Hz or 60Hz.
1. Connect the power cord to
the AC Mains Input socket
on the rear panel.
2. If the power cord does not
have an earth ground,
ensure the ground
terminal is connected to an
earth ground.
Ensure the power cord is connected to an earth
ground. Failure could be harmful to the operator
and instrument.
3. Press the Power button.
4. When the unit is powered up, the display will
show the last time parameters in either MANU
or AUTO test mode as shown below.
To Next Page
Loading...
