GW Instek GPT-10000 Series - Auto Commands; Auto:step; Auto:name

REMOTE CONTROL
251
Auto Commands
AUTO:STEP ............................................................................................251
AUTO:NAME .........................................................................................251
AUTO:EDIT:ADD ..................................................................................252
AUTO<x>:EDIT:HOLD .........................................................................253
AUTO<x>:EDIT:SKIP ............................................................................253
AUTO:EDIT:DEL ....................................................................................254
AUTO:TEST:RETurn ..............................................................................254
AUTO:EDIT:SHOW ...............................................................................255
AUTO:STEP
Set
Query
Description
Sets or queries the AUTO number (automatic test
number).
Syntax
Query Syntax
AUTO:STEP <NR1>
AUTO:STEP?
Parameter/
Return parameter
<NR1>
1~100
Example
AUTO:STEP 100
Sets the current AUTO number to 100
AUTO:NAME
Set
Query
Description
Sets or returns the AUTO name for the selected
automatic test. The test must be in AUTO mode
before this command can be used.
Note only alphanumeric characters (A-Z, a-z, 0-9)
and the “_” underscore character can be used to set
the AUTO test name.
Syntax
Query Syntax
AUTO:NAME <”string”>
AUTO:NAME?