GW Instek GPT-10000 Series - Manu:gb:rloset; Manu:gb:ttime

GPT-10000 Series User Manual
244
Example
MANU:GB:RHIS 100.0
Sets the GB HI SET value to 100mΩ.
Note
If the GB current x (HI SET resistance + REF) > 7.2V,
an “Err” message will be shown on display. And an
“GBV > 7.2V” message will be returned after using the
query command “SYSTem:ERRor ?” in remote control.
MANU:GB:RLOSet
Set
Query
Description
Sets or returns the GB LOW SET resistance value
in mΩ. The LOW SET value must be less than the
HI SET value. The test must first be in GB mode
before this command can be used.
Syntax
Query Syntax
MANU:GB:RLOSet<NR2>
MANU:GB:RLOSet?
Parameter/
Return parameter
<NR2>
0.000 ~ 649.9 (mΩ)
Example
MANU:GB:RLOS 50
Sets the GB LO SET resistance to 50mΩ.
MANU:GB:TTIMe
Set
Query
Description
Sets or returns the GB test time in seconds. The test
must first be in GB mode before this command can
be used.
Syntax
Query Syntax
MANU:GB:TTIMe <NR2>
MANU:GB:TTIMe?
Parameter/
Return parameter
<NR2>
0.3 ~ 999.9 seconds
Example
MANU:GB:TTIM 1
Sets the GB test time to 1 second.